Contact Us:

HOME > switchgears

SWITCHGEARS

We are dealing, installing and servicing various types of L&T Switch-gears having best performance and very durable Products life including :
We have service center at Gandhidham & all spares available of all sold pumps.

DOL Staters Single Phase / Three Phase

Overview

Direct On-Line (DOL) method is the simplest starting method for 3-phase pump set. L&T Electrical & Automation (E&A) offers two variants of DOL method – starter and controller.

DOL starters are basic electrical starters with contactors and relay for ON/OFF operation and overload protection of the pump set.

Over and above the ON/OFF operation and overload protection features equipped in Controllers, it also provides additional features like Auto ON, indications of Supply ON/OFF and Pump ON/OFF, reading of real time voltage & current of pump with unique Dual analog meter. Single phasing protection relay (SPPR) inside Controller unit provides the advanced protection features viz. single-phasing prevention, phase-reversal protection, phase-unbalance protection, variable time-delay adjustment for delayed operation of pump set.

Fully Automatic Star Delta Starter

Overview

Star Delta Starting is one of the methods of starting 3-Phase pump-sets. In Fully Automatic version of Star-Delta (FASD) Starter, the changeover from star winding to delta winding is done with the help of a timer. L&T Electrical & Automation (E&A) offers two variants of FASD – called starters and controllers.

FASD starters are basic electrical starters with contactor and relay combination for ON-OFF operation and overload protection of the pump-sets. Over and above the ON/OFF operation and overload protection features equipped in Controllers, it also provides additional features like Auto ON, indications of Supply ON/OFF and Pump ON/OFF, reading of real time voltage & current of pump with unique Dual analog meter. Single phasing protection relay (SPPR) inside Controller unit provides the advanced protection features viz. single-phasing prevention, phase-reversal protection, phase-unbalance protection, variable time-delay adjustment for delayed operation of pump set.

FASD Starters:
  • MK1 FASD – with MK1 contactors, MK1 relay and GT200 timer
  • MU FASD – with MU contactors, MU relay and ST100 timer
  • MB FASD – with MU contactors, MN relay and ST100 timer
  • ML FASD – with ML contactors, ML relay and ST100 timer
Controllers:
  • MU-G15 – with MK1 contactors, MK1 relay and SDz5 (SPPR + timer)
  • MU-G20 & MU-G20H – with MU contactors, MU relay and SDz5 (SPPR + timer)
  • MU-G30 – ML contactors, MN relay and SDz5 (SPPR + timer)
  • MU-G50 - ML contactors, MN relay and SDz5 (SPPR + timer)
  • MU-G75 - ML contactors, MN relay and SDz5 (SPPR + timer)

Semi Automatic Star Delta Starter

Overview

Semi Automatic Star Delta (SASD) is the method of starting 3-phase pump-sets. During the starting of pump-sets, the changeover from star winding to delta winding is done manually. Our SASD starter provides basic function of ON/OFF operation and overload protection of the pump set.

SASD Starters:
  • MK1 SASD - with MK1 contactors and MK1 relay
  • MU SASD - with MU contactors and MU relay
  • MB SASD - with MU contactors and MN relay
  • ML SASD - with ML contactors and ML relay

Single Phase Submersible Control Panel

Overview

Single Phase Submersible Pump Controller - 0.5 HP to 3 HP available in MR-G2 model and 5 HP in MR-G3 Model.

Three Phase Submersible Control Panel

Overview

Three Phase Submersible Pump Controller - 3 HP to 75 HP available in MVG models.

MU-G6
MU-G10
MU-G20
MU-G50

MCB Three Phase Exclusive for Agriculture Pumps

Overview

Everyone needs safe and reliable power. Whether it is an industry, household appliances and farm equipment, our low-voltage final distribution products address every need of protection, control, and monitoring of electrical distribution and ensure the highest level of safety to your electrical devices.

Our Final Distribution Products include protection devices such as Miniature Circuit Breakers (MCBs), Residual Current Circuit Breakers (RCCBs), Residual Current Circuit Breaker with Overcurrent Protection (RCBOs), Surge Protection Devices (SPDs) as well as a host of control and monitoring devices (Isolators, Modular Indicators etc.) and different types of Distribution Boards.

From protection against overload and earth leakage to lightning and switching surges, our AU range of Final Power Distribution Products safeguards all your electrical devices and protects from electrical shocks.

Designed to save every Watt of consumption with all the essential features built-in, our products are easy to install, operate, and service.

MCB

Protection devices in the AU Solutions range protect lives and installations from overload, short-circuit, earth leakage, lightning and switching surges.

MCBs - Protection with Savings

Apart from providing protection against overload and short-circuit faults, the AU range of MCBs is designed to offer the lowest watt loss in the industry. This conserves power and helps you save much more than money.

0.5A - 125A | B, C, D Curves | SP, DP, TP, FP, SPN & TPN

Available in Standard & Quick Connect Version

MCB Exora
Overview

The Exora range is designed to meet the needs of safety at the final distribution of electrical power. The range offers modular devices that makes your home and workplace safe to operate and live.

The EXORA range offers various Protection and Control devices such as Miniature Circuit Breakers (MCB) – for AC & DC systems, Residual Current Circuit Breakers (RCCBs) & Isolators for the final distribution of electrical power. With a robust design and user-friendly features, the Exora range products are reliable and easy to use.

MCBs:

0.5A - 63A | B, C, D Curves | SP, DP, TP, FP

Available in AC & DC versions

The KEMA certified, AC MCBs (Miniature Circuit Breakers) conforms to IS/IEC 60898-1 & IEC 60947-2, hence offers protection for both residential and industrial applications. Also, a Variety of DC MCB offers protection for various DC applications

Short circuit breaking capacity : 10kA as per IS/IEC 60898-1

: 15kA(up to 40A)

10kA(50A & 63A)

DC MCBs conforms to IEC 60947-2

Rated voltage : 130V(SP)/250V(DP) with rated short-circuit breaking capacity of 6kA

Rated voltage : 250V(SP)/500V(DP) with rated short-circuit breaking capacity of 10kA

Salient features:
  • True Contact Indication in MCBs enhancing safety by reflecting actual contact status
  • Integrated Label holder for easy circuit identification
  • IP-20 Finger-proof terminals enhances safety and eliminates the chances of accidental contact
Range of Controlling and monitoring devices
    • MCB accessories: Auxiliary Contact, Trip Alarm Contact, Shunt Release

I Protector

Overview

MPR300 is a Microprocessor based LT Motor protection relay. The relay has got inbuilt CTs for motor sizes up to 50KW (i.e 88 A current)

Protections offered:
  • Thermal Overload
  • Earth Fault
  • Single Phasing
  • Locked Rotor
  • Under Current
Features:
  • LEDs for trip indication.
  • Inbuilt CTs available
  • 4 selectable trip time curves for thermal overload
  • Test facility through front push button.
  • Manual reset facility through front push button.
  • With / Without fail safe mode
Application:
  • MPR 300 offers you greater security, operator safety through proper co-ordination in case of earth fault on motor feeder.
  • MPR300 is used for protection of motors widely used in fans, pumps, crushers, mills, compressors, belt conveyors, centrifuges, mixers, ventilators, escalators, motorized valves etc.
Overview

MM30 is a Microprocessor based Comprehensive Motor Protection Relay designed for Medium and Large Motors

Features:
  • Auto setting of parameters
  • Draw out enclosure
  • 8 digit alpha numeric display
  • Real Time Measurements
  • Measurement and display of actual & trip data recordings.
  • 8 LED’s for fault indication.
  • Control on number of starts of motor
  • Starting sequence control.
    During start-up of the motor, the unit can control an output contact to automatically manage the starting transition.
  • RS485 port for communication with Modbus Protocol.

Capacitors

Standard Duty Capacitors & MFD Capacitors

Our Standard Duty Capacitors are metalized polypropylene (MPP) capacitors. These capacitors come with a stacked winding and are impregnated with a non-PCB biodegradable soft resin. These capacitors are self-healing type and come with an over pressure disconnector and finger proof terminals.

MFD capacitors are used in Single Phase Applications.

Features:
  • Range available: 1-25 kVAr (Cyl) & 1-50 kVAr (Box)
  • Box & Cylindrical type construction (Resin-filled)
  • MPP technology with Self-Healing & Over-pressure Disconnector
  • Over current withstand capability - 1.5 In
  • Inrush current withstand capability - 200 In
  • Number of switching operations per year - 5000
  • Low operating loss (0.45 W/kVAr)
  • Application in agricultural pump-sets & small-scale industries
Heavy Duty Capacitors

Our Heavy Duty Capacitors are metallized polypropylene (MPP) capacitors. The capacitors come with stacked windings. The box capacitors are impregnated with a non-PCB biodegradable resin The cylindrical Capacitors are subjected to an extended period of drying after which the casing is filled with an inert gas to prevent corrosion of the winding elements and inner electrical contacts. Compact design ensures space saving. Heavy Duty capacitors have a long life of 150000 hours.

Features:
  • Range available: 3-30 kVAr (Cyl) & 5-50 kVAr (Box)
  • Box (Resin-filled) & Cylindrical (Gas-filled) type construction
  • MPP technology with Self-Healing & Over-pressure Disconnector
  • Over current withstand capability - 1.8 In
  • Inrush current withstand capability - 300 In
  • Number of switching operations per year - 8000
  • Low operating loss (0.45 W/kVAr)
  • Application in commercial buildings with CFLs & SMPS, garment industries etc.
LTXL: Ultra-Heavy Duty Capacitors

The LTXL ultra-heavy duty capacitors are advanced APP capacitors. They can withstand heavy load fluctuations, high inrush current and harmonics. They can be used in applications such as welding, steel rolling, etc., with heavy load fluctuations, high harmonic distortion levels (non-linear load >15%) and systems with high dv / dt. The capacitor is designed to operate at ambient temperature up to 70deg C.

Features:
  • Range available: 5-100 kVAr
  • Box type construction (Oil-filled)
  • Advanced APP technology with Internal Fuse
  • High over current withstand capability - 3 In
  • High inrush current withstand capability - 500 In
  • Improved operating life of capacitor - 300000 hours
  • More number of switching operations - 20000 operations/year
  • Lower operating losses - 0.35 W/kVAr
  • Suitable for harsh environments with heavy load fluctuations and high thermal loading

MPower Pro & MPower Plus (Module for Mobile Staters)

Overview

M-POWER – Module for mobile starter is the product for remote operation of pump set through a mobile phone. The farmer can operate his pump set at the farm through his mobile from anywhere. He just has to give a “Miss Call” to ON / OFF the pump in his farm.

M-POWER is an auxiliary unit connected along with the starter/controller so that once connected with starter, user can control the operation of starter/controller from anywhere anytime.

Submersible Flat Cables

Overview

L&T Electrical & Automation’s Agriculture Submersible Flat Cables are made of bright, plain multi-strand annealed copper conductor, as per class 5 of IS:8130:1984. These cables are used for Agricultural submersible pump set applications and are available in 3 core - 500 meter & 1000 meter drums.

Voltage Grade 1.1 kV (1100 V) conforming to IS:694:1990.

XLPE Agricultural Flat Cables - These wires are made of cross-linked polyethylene material with high continuous conductor temperature - 90 C and high intermittent overloading - 130 C. Since it has better corrosion resistance, it is suitable for alkaline hard water areas.

About Us

Our Achievements

Our customer's trust and support is our bigest achievement

We sell more than 2000 pumps a year, We having 3000 Sq. Ft. Office and Godown Area.

12

Awards won

3000 Sq.Ft.

Office & Godown Area

2000

Pumps Selling per year

30

Team members

We are authorize dealer of best award winning and durable products in kutch district :
Authorize Dealer

Taro Pumps

-Taro Pumps Texmo Industries Est. 1956

Authorize Dealer

L&T Switchgears

-L&T Electronic

Authorize Dealer

Tuffropes

-Tuffropes